SOUPLETHANE 5 ATE

Souplethane 5 Ate, composed of a two-component, solvent-free, odorless polyurea-urethane resin, is cold-applied. This system, compliant with Apsel regulations and qualified by a DTA (French Technical Assistance Agency) with extension to the French Overseas Territories (DROM), benefits from a Broof T1 fire rating. It can be used in new construction and renovation on all types of substrates: concrete, steel, wood, bitumen, asphalt, and in-place resins. A root-resistant waterproofing resin for flat roofs Souplethane 5 Ate ensures continuous, seamless waterproofing on flat roofs, balconies, loggias, walkways, and terraces. It is also a root-resistant coating under green roofs, certified by a test report confirming its resistance to root penetration in accordance with standard EN 13948. A self-protected liquid waterproofing for walkable terraces This is a self-protected system (for classes SE1P, SE1M, and SE2P and SE2M) : directly accessible to vehicle or trolley traffic, the thickness of the S.E.L. is increased to 2 mm with or without a non-slip finish. A liquid waterproofing resin for all climates The climatic conditions supported by Souplethane 5 Ate resin are as follows: -10°C < T°C < 50°C It tolerates ambient humidity < 95% and is not sensitive to rain. An environmentally friendly liquid waterproofing resin Souplethane 5 Ate liquid waterproofing resin does not emit any components into the atmosphere that pose a health hazard: . No odor . No Bisphenol A . No formaldehyde . No phthalates . No VOCs Souplethane 5 Ate meets the most stringent requirements for HQE or BREEAM buildings (and thus adds significant value to the structures). A liquid waterproofing resin with a wide range of finishes: UV-resistant colored finishes Decorative finishes with glitter, quartz color, chips, etc. Anti-slip finishes These various finishes that can be applied to the SOUPLETHANE 5 ATE liquid waterproofing system provide: - Various decorative effects - Slip-reducing properties - Mechanical protection Benefits - Easy to apply - Fast drying (5 hours at 20°C) - 100% solids content, VOC-HQE emission classification - Humidity: 4 mm) - High chemical resistance: pH 1 to 13 - Excellent adhesion to concrete: 3.5 MPa - Compressive strength >110 MPa - Fire classification: Broof T1 - Flash point above 200°C Easy to apply Solvent-free, odorless, and BPA-free Concrete crack resistance: 5 mm