SOUPLETHANE 5 ATE

Souplethane 5 Ate, composed of a two-component polyurea-urethane resin without solvent and without odor, is cold applicable. This system, compliant with Professional Association of Liquid Waterproofing Systems rules and qualified by a technical application document with extension to the Overseas departments and regions, benefits from a Broof t1 fire classification. It can be used in new construction and rehabilitation on all types of substrate : concrete, steel, wood, bitumen, asphalt, resins in place.

An anti-root terrace roof waterproofing resin
Souplethane 5 Ate ensures continuous waterproofing without joints on roof terraces, balconies, loggias, passageways and stands. It is also an anti-root coating under green roofs qualified by a test report confirming resistance to root penetration according to standard EN 13948.

Self-protected liquid waterproofing for walkable terraces
It is a self-protected system (for classes SE1P, SE1M and SE2P and SE2M) : directly accessible to the circulation of vehicles or trolleys, the thickness of the liquid waterproofing system is increased to 2 mm with or without anti-slip finish.

A liquid waterproofing resin for all climates
The climatic conditions supported by Souplethane 5 Ate resin are as follows :
- 10°C < T°C < 50°C
It tolerates ambient humidity < 95% and is not sensitive to rain.

An eco-friendly liquid sealant resin
Souplethane 5 Ate liquid waterproofing resin does not emit any components presenting a health hazard into the atmosphere :
. no smell
. no Bisphenol A
. no formaldehydes
. no phthalates
. no VOC
Souplethane 5 Ate meets the most stringent requirements for BREEAM buildings (and thus gives significant added value to the structures).

A liquid waterproofing resin accompanied by a wide range of finishes :
UV-resistant colored finishes
Decorative finishes with glitter, quartz color, chips…
Des finitions anti-dérapantes
These various finishes that can cover the liquid waterproofing system SOUPLETHANE 5 ATE provide :
- varied decorative aspects
- slippery reduction properties
- mechanical protection

Benefits
- Easy to apply
- Quick drying 5 hours at 20°C
- 100% dry extract, classified in VOC-HQE emissions
- Hygrometry : < 95% RH
- High resistance to cracking (> 4 mm)
- High resistance to chemicals : pH from 1 to 13
- Excellent adhesion to concrete : 3.5 MPa
- Compressive strength > 110 MPa
- Fire classification : Broof t1
- Flash point above 200°C