Souplethane 5 ATE

Self-protected liquid waterproofing against roots for roofs and balconies Souplethane 5 Ate, composed of a two-component, solvent-free, odorless polyurea-urethane resin, is cold-applied. This system, compliant with Apsel regulations and qualified by a DTA (French Technical Assistance Agency) with extension to the French Overseas Territories (DROM), benefits from a Broof T1 fire rating. It can be used in new construction and renovation on all types of substrates: concrete, steel, wood, bitumen, asphalt, and in-place resins. 

A liquid, root-resistant waterproofing resin for flat roofs

Souplethane 5 Ate ensures continuous, seamless waterproofing on flat roofs, balconies, loggias, walkways, and terraces. It is also a root-resistant coating under green roofs, certified by a test report confirming its resistance to root penetration in accordance with standard EN 13948. 

A self-protected liquid waterproofing for walkable terraces

This is a self-protected system (for classes SE1P, SE1M, and SE2P and SE2M) : directly accessible to vehicle or trolley traffic, the thickness of the S.E.L. is increased to 2 mm with or without a non-slip finish. 

A liquid waterproofing resin for all climates

The climatic conditions supported by Souplethane 5 Ate resin are as follows: -10°C < T°C < 50°C It tolerates ambient humidity < 95% and is not sensitive to rain. 

An environmentally friendly liquid waterproofing resin

Souplethane 5 Ate liquid waterproofing resin does not emit any components into the atmosphere that pose a health hazard: . No odor . No Bisphenol A . No formaldehyde . No phthalates . No VOCs Souplethane 5 Ate meets the most stringent requirements for HQE or BREEAM buildings (and thus adds significant value to the structures). 

A liquid waterproofing resin with a wide range of finishes: UV-resistant colored finishes

Decorative finishes with glitter, quartz color, chips, etc. Anti-slip finishes These various finishes that can be applied to the SOUPLETHANE 5 ATE liquid waterproofing system provide: - Various decorative effects - Slip-reducing properties - Mechanical protection 

Benefits

• Easy to apply
• Fast drying (5 hours at 20°C)
• 100% solids content, VOC-HQE emission classification
• Humidity: 4 mm)
• High chemical resistance: pH 1 to 13
• Excellent adhesion to concrete: 3.5 MPa
• Compressive strength >110 MPa
• Fire classification: Broof T1
• Flash point above 200°C
• Solvent-free, odorless, and BPA-free
• Concrete crack resistance: 5 mm
• Crack-bridging capacity on concrete: 5 mm