Yes, SOUPLETHANE 5 is designed for both new and rehabilitated applications, without the need for heavy demolition.

No, SOUPLETHANE 5 is 100% solvent-free and formulated with 100% solids components

• Preparation : check for humidity, temperature, dew point.
• Manual application (comb or notched roller) or by spraying
• Cover time : 1h (wall) to 5-72h (floors)
• Completely dried in 24h

The pot life is 40 minutes after mixing

Yes, the PU AQUEUEX primer (150g/m2) is recommended for good adhesion

• Anti-slip / softcarpet finish
• UV-resistant finish
• Colored quartz or chipped finish
• Glued or sealed tile installation (depending on the aplication)

The service life (after application) indicated on our DOP (Declaration of Performance) is W2, which corresponds to an estimated lifespan of :

≥ 25 years for application on concrete substrates, with a suitable primer, in a low-impact indoor environment

- 15 to 20 years for application on concrete or steel substrates, outdoors with moderate UV rays

- 10 to 15 years for high exposure (abrasion, chemicals, extreme thermal cycles).

Yes, the particularity of SOUPLETHANE 5 is to bridge all cracks and to last over time

Yes, SOUPLETHANE 5 can be applied to all substrates : concrete, breeze block, wood, steel, EPDM, etc.

Yes, it is possible to cover the whole thing continuously

1kg per m2, if the substrate is clean

No, there is no solvent or smell.

To prepare the substrate when it is damaged applying SOUPLETHANE 5, especially if the concrete is powdery or mealy. You should plan for 150 g/m2 or 1kg for 7 m2

It is imperative to apply SOUPLETHANE 5 within 2 minutes of making the mixture, otherwise, the mixture will harden and become unusable. So not to be disturbed at the time of the planned work ! Or it is possible to do small 3-to-1 dosages, i.E. 100 g for resin for 30 g of hardener

It is an anti-dust film that protects concrete, to be applied to garage floor and which allows easy maintenance and cleaning